Skip to main content

Baltimore/Washington (BWI) Terminal Map

Navigation Snapshot

Match the checkpoint to A/B/C or D/E, then choose the correct level.

BWI has one terminal building with five concourses. A, B and C share a secure gate area; D and E use a separate screening zone. The upper-level map covers check-in and departures, while the lower-level map helps with baggage claim, arrivals and transportation.

Terminal building
1
Concourses
A–E
Secure zones
A/B/C · D/E
Floor controls
UL + LL

Use the BWI Thurgood Marshall map to locate your concourse, gate and checkpoint before deciding where to eat or meet a driver. A concourse letter identifies a gate area inside the terminal, not a separate airport. The important transfer boundary is between the A/B/C and D/E secure zones; crossing it changes the screening steps for your onward flight.

How to read the BWI terminal map

The interactive map opens on Upper Level. Use UL for airline ticket counters, checkpoints and gates, or LL for lower-level arrival facilities. Toggle Food & Drinks, Shopping, Restrooms, Amenities, Ticket Counters or Gates to reduce clutter. Search an exact gate or place, then inspect the concourse and floor together. The airport’s printable maps provide another way to check the terminal overview, curb doors, parking links and facilities before your visit.

BWI official terminal maps (opens in a new tab)

The map uses the airport’s live public map service. FlyIndex checked the linked terminal, security and connection guidance on October 5, 2026. Map providers can update layouts without publishing a revision date; check your airline’s flight details and current airport notices before traveling.

Open the BWI map in a full window

Staying near BWI?

For an early departure or a late arrival, a hotel close to the airport keeps the transfer short. Compare rates for hotels around BWI.

Compare hotels near BWI

Partner link: FlyIndex may earn a commission on bookings, at no extra cost to you. It never affects our wait-time or airport data. How we handle ads

BWI airlines, terminals & connections

Sources checked

Use these terminal and concourse notes to plan your route. Airline examples are a selection; confirm the operating airline, check-in location and departure gate for your flight.

Concourse A

A/B/C secure zone

Find your exact A Gate and the applicable checkpoint on the upper-level map. Concourse B and C connections can remain inside this zone.

Concourse B

A/B/C secure zone

Use the A/B food court as a map landmark; a nearby-looking D Gate is across a separate screening boundary.

Concourse C

A/B/C secure zone

Confirm the flight’s gate rather than selecting a checkpoint solely because it is close to the airline counter.

Concourse D

D/E secure zone

Bridge replacement can temporarily affect individual gates. Check live flight information and airport notices before walking to a listed gate.

Concourse E

D/E secure zone and international facilities

Follow international-arrivals instructions when entry processing is required; the departure-level route is not the customs route.

BWI official terminal maps (opens in a new tab)

A/B/C and D/E: check the screening boundary

Use the gate letter to select the appropriate secure zone. A, B and C are connected after security; D and E form another zone. A move between the two zones requires an outside-security transfer and another checkpoint. Locate your next gate before choosing a restaurant on the opposite side, and account for bag collection or a counter visit if your tickets require either step.

BWI official terminal maps (opens in a new tab)

Checkpoint hours and exit lanes are different

BWI publishes screening hours separately from exit-lane availability. Its current guidance lists A and C screening from 4 a.m. to 8 p.m. and B and D/E screening around the clock. A lower-level exit can remain open when the corresponding screening checkpoint is closed. Use the current security page for standard and expedited screening arrangements rather than assuming every mapped entrance is open at all hours.

BWI screening and exit-lane operating hours (opens in a new tab)

Arrivals: change to the lower-level map

After landing, use flight and baggage displays to find the assigned carousel, then switch to LL to locate the exit and transportation facilities. Give a driver the terminal curb location and door number from the signs around you. A pin on the upper-level map can identify a departure counter or gate while the pickup you need is downstairs; verify the level before arranging a meeting.

BWI official terminal maps (opens in a new tab)

Concourse D construction: confirm the operating gate

The airport’s boarding-bridge program includes a phase scheduled from September 18 through December 28, 2026, affecting D4, D10, D24, D26 and D29 in rotating closures. These gates are not all scheduled to close simultaneously. The map is useful for orientation, but your airline’s current gate assignment and temporary airport signs determine where to board. Recheck the notice when traveling during the project.

BWI passenger boarding bridge replacement (opens in a new tab)

Amenities and accessible routes: filter before you walk

Use the Restrooms and Amenities layers to identify facilities near your concourse, including adult changing restrooms shown in the live map. Ticket Counters and Gates help distinguish public and secure destinations. Look for elevators when changing between upper and lower levels, and ask airport or airline staff about an accessible path if construction signs differ from the mapped route. For food, check both the gate area and screening boundary.

BWI official terminal maps (opens in a new tab)

BWI terminal map FAQ

Can you walk between all BWI concourses after security?

A, B and C share one secure area; D and E share another. Crossing between A/B/C and D/E requires leaving security and being screened again.

Which BWI map level shows baggage claim?

Use Lower Level (LL) for arrivals and baggage-claim orientation. Upper Level (UL) covers departures, airline ticket counters and the gate-side layout.

Are all BWI checkpoints open 24 hours?

No. Current airport guidance lists A and C screening from 4 a.m. to 8 p.m., with B and D/E open 24 hours. Screening hours and exit-lane hours are separate; check the official page before traveling.

Does the D/E checkpoint provide access to A, B and C Gates?

The D/E checkpoint serves the D/E secure zone. For an A, B or C departure, use a checkpoint serving A/B/C and verify current operating hours.

Will Concourse D construction change my BWI gate?

Bridge replacement involves rotating closures at D4, D10, D24, D26 and D29 during the announced September–December 2026 phase. Check your airline’s live gate assignment and airport notices.

How do I find a restroom or restaurant on the BWI map?

Select the upper or lower level, enable the relevant Food & Drinks, Restrooms or Amenities layer and search the place or gate. Confirm its concourse and security zone before walking there.

Official Travel Resources

5 verified external links from airport operators and U.S. agencies.