Skip to main content

Minneapolis–Saint Paul (MSP) Terminal Map

Navigation Snapshot

MSP’s two terminals use different airlines; the light-rail transfer is outside security.

Terminal 1 and Terminal 2 are separate buildings with distinct check-in and screening areas. The light-rail ride between them is free and outside security. Confirm the airline’s terminal before driving to the airport, then allow for a station walk and another checkpoint if changing terminals.

Terminals
1 + 2
Between terminals
Free light rail
Security boundary
Separate screening
Pickup
Confirm terminal

Use the Minneapolis–Saint Paul map to find the airline counter, terminal, concourse and gate for your flight. Terminal 1 is a different destination from Terminal 2, not simply another concourse inside one secure building. For arrivals, verify the terminal before arranging pickup: each has its own curb, parking links and ground transportation route.

How to read the MSP terminal map

Select Terminal 1 or Terminal 2 in the map’s building control and change the floor for ticketing, baggage claim, gates or transportation. Search an airline or exact gate before estimating the walk. The overview helps distinguish the two terminals and their surrounding ramps; station access involves a public-side route through the terminal’s transportation facilities. Restaurant, Restroom and Airline filters locate services near your flight, while the airport terminal guide confirms airline assignments.

MSP official interactive terminal map (opens in a new tab)

The map uses the airport’s live public map service. FlyIndex checked the linked terminal, security and connection guidance on October 5, 2026. Map providers can update layouts without publishing a revision date; check your airline’s flight details and current airport notices before traveling.

Open the MSP map in a full window

Staying near MSP?

For an early departure or a late arrival, a hotel close to the airport keeps the transfer short. Compare rates for hotels around MSP.

Compare hotels near MSP

Partner link: FlyIndex may earn a commission on bookings, at no extra cost to you. It never affects our wait-time or airport data. How we handle ads

MSP airlines, terminals & connections

Sources checked

Use these terminal and concourse notes to plan your route. Airline examples are a selection; confirm the operating airline, check-in location and departure gate for your flight.

Terminal 1

Delta, American, United, Air Canada and Alaska examples

Ticketing is on Level 2 and baggage claim on Level 1. Find the concourse and gate after confirming the terminal.

Terminal 2

Southwest, Sun Country, Frontier and Icelandair examples

Ticketing is on Level 1 and security is on Level 2. Allow for the light-rail station walk if you arrive at Terminal 1 by mistake.

MSP terminal information and airline assignments (opens in a new tab)

Light rail: the terminal-to-terminal ride is free

The airport’s light-rail connection between Terminals 1 and 2 is free; no ticket is needed for that inter-terminal segment. It is outside security. Terminal 1 station access is below the Red and Blue parking ramps, while Terminal 2’s station is near the Orange Ramp. Follow Light Rail signs and allow for the station walks, wait and another security check before an onward flight.

MSP travel between terminals (opens in a new tab)

Accessible transfer: check the shuttle option

MSP also offers an accessible shuttle between terminals for travelers who need an alternative to the light-rail route. The airport lists operation from 6 a.m. to 10 p.m., approximately every 20 minutes, with an on-request arrangement outside those hours. Follow the official instructions for requesting and locating it, and include assistance and screening time when planning a connection rather than using the rail ride alone as your estimate.

MSP travel between terminals (opens in a new tab)

Security: each terminal has its own checkpoints

Terminal 1 has North and South checkpoints, with one standard checkpoint available around the clock under current airport guidance. At Terminal 2, Checkpoint 1 opens at 4 a.m. until the last departure; Checkpoint 2 is restricted to designated expedited services and has shorter hours. Confirm the current lane details for your boarding pass before selecting a mapped entrance. A terminal change does not preserve secure-side access.

MSP security screening locations and hours (opens in a new tab)

Pickup: choose the terminal before the curb

MSP stresses confirming the traveler’s airline and terminal before arranging pickup. Drivers should approach only when the passenger has collected bags and is waiting outside. Terminal 1 has a FLEX Lane linked to doors 5–8, while Terminal 2 offers an Express pickup/drop-off area on Level 2 of the Purple Ramp. Use current signs and choose the route appropriate to your accessibility needs.

MSP pickup, drop-off and alternative lanes (opens in a new tab)

Gates, meals and service stops: search within your terminal

Terminal 1 and Terminal 2 have different airline and gate layouts. Confirm the terminal in the airport’s airline information, then use the interactive map for a concourse, exact gate and nearby services. A restaurant or lounge in the other terminal can require a public train journey and screening again. Keep a connection’s food or shopping stop on the route to your boarding gate whenever practical.

MSP terminal information and airline assignments (opens in a new tab)

MSP terminal map FAQ

Is the light rail between MSP terminals free?

Yes. No ticket is needed for the ride between Terminals 1 and 2. This is a public-side transfer, so a departing passenger must pass security in the destination terminal.

Which MSP terminal does Southwest use?

The airport lists Southwest in Terminal 2, along with Sun Country, Frontier and Icelandair. Confirm your individual flight’s terminal before arriving.

Which MSP terminal do Delta and United use?

The airport lists Delta and United in Terminal 1. Verify the operating airline on a codeshare and the gate assignment for the flight.

Where are baggage claim and ticketing at MSP?

Terminal 1 has ticketing on Level 2 and baggage claim on Level 1. Terminal 2 has ticketing on Level 1 and security on Level 2; select the correct building and floor in the map.

Does MSP offer an accessible transfer between terminals?

Yes. The airport lists an accessible shuttle from 6 a.m. to 10 p.m., about every 20 minutes, and an on-request arrangement outside those hours. Follow its current request and stop instructions.

Can a driver wait for me at the MSP terminal curb?

Drivers should approach when the passenger is outside and ready. Use the cell phone waiting areas or parking while bags are being collected, and confirm Terminal 1 or 2 before approaching.

More MSP Airport Resources

Official Travel Resources

5 verified external links from airport operators and U.S. agencies.